Along with GAPTECH team of expertise, state of art process integration technologies will be applied to maximize the energy utilization across your process plant
Robust optimization methodologies that will reduce your process utility demands
- Pinch Analysis
- Beyond Pinch
- Process Profiles
- CHP & COGEN
- Energy Targeting
- CCP & Tri-Generation
- EPI /KPI
- Load Management
- Operation Excellence
Energy benchmarking defines an intensity measure of process energy performance.
Fired Heaters are one of the highest energy consumers in process plant, as it consume fuel to heat a process stream, reboil a distillation column bottom or generate ...
Due to uncertainty and assumptions during hydraulics design phase of any process unit, pumps are normally sized with an average of 20% over-design capacity. It is a...
Pinch analysis and process integration techniques are established
methods to increase process heat recovery, thereby
limiting overall plant energy requirements. Pi...
Most heat exchangers are already low minimum approach temperatures; thus, there is little scope to increase the heat duty of the existing exchangers by merely adding...
GAPTECH (GULF ADVANCED PROCESS TECHNOLOGIES) has diversified Process and Energy Optimization experience in Oil & Gas Processing, Refineries Petrochemicals, Power Plants and Cogeneration. We are Supporting processes industry professionals with knowledge and software tools to enable better process performance and energy efficiency.
GAPTECH is participating on the 12th SABIC Technical Conference “STC-12” (6 – 9 NOVEMBER 2016).you are welcome to visit our booth number 124 STC-12 exhibition page
GAPTECH is participating in Gas Processing Association (GPA) 25th Annual Technical Conference 2017 (9th -11th May 2017) which will be held in Abu Dhabi, UAE. You are welcome to visit our booth number D9. Event page
GAPTECH will be participating as an Associate Sponsor in 7TH TRC – JCCP/IDEMITSU Refining R&D International Symposium, taking place from 25 – 27 September 2017 under the theme “Research & Development for a Sustainable Refining Industry”. Location: TAKREER RESEARCH CENTRE, SAS AL NAKHL, ABU DHABI, UAE http://trc-symposium.com/
GAPTECH is participating in The 4th Middle East Process Engineering Conference & Exhibition that will be held in Bahrain International Exhibition and Convention Center during the period 9-11 October 2017. GAPTECH CEO, Mr. Aseeri has been announced as a technical speaker, he will be presenting GAPTECH’s System Approach to Compressors Performance Evaluation. You are most welcome to visit our booth#20
GAPTECH is participating in The Abu Dhabi International Petroleum Exhibition and Conference (ADIPEC) 2017 which will be held in Abu Dhabi from 13 to 16 November 2017 . Please visit us at stand# 2450 Hall 2 to know more about GAPTECH ENERGY OPTIMIZATION SERVICES http://exhibitors2017.adipec.com/exhibitordetails.aspx?exid=exhiReg769